When to use it
The official description does not include a separate “Use when”. Per the spec, agents activate this skill when the task matches keywords in that description.
Skills ZICQ category:Agent Workflows solidworks-automation
SolidWorks CAD automated skills, with priority to cover empirical parts, troughs, assembly, engineering maps, export and delivery reviews; all capability levels are based on capabilities.yaml, and manual review of non-validation capacity is required。
Official URL:skills.sh
Intro in this page language first. The official description stays in its original wording; we do not rewrite SKILL.md.
The official description does not include a separate “Use when”. Per the spec, agents activate this skill when the task matches keywords in that description.
Per Agent Skills progressive disclosure: name and description load at startup (~100 tokens); the full SKILL.md body loads when the skill activates; scripts/, references/, and assets/ load only as needed. This file's sections: SolidWorks 自动化技能; 快速开始; 环境要求; 入口自检; 多入口与多后端; Python 依赖提醒.
File analysis: besides SKILL.md, the body references scripts/sw_preflight.py, scripts/cad_studio.py, scripts/backend_router.py, references/language-backend-routing.md, scripts/headless_cad_writer.py, references/troubleshooting.md. Those resources load on demand.
SolidWorks CAD 自动化技能,优先覆盖经验证的零件、孔槽、装配、工程图、导出和交付复核;所有能力等级以 capabilities.yaml 为准,未验证能力必须走人工复核。
SolidWorks 自动化技能快速开始环境要求入口自检多入口与多后端Python 依赖提醒核心 SolidWorks COM 自动化依赖仅在需要 GLB/GLTF/OBJ/STL 网格检查、缩放或转换时安装连接 SolidWorks核心工作流OpenClaw 协作方式使用流程
Source category:skills.sh agent-skill
namesolidworks-automationdescriptionscripts/sw_preflight.pyscripts/cad_studio.pyscripts/backend_router.pyreferences/language-backend-routing.mdscripts/headless_cad_writer.pyreferences/troubleshooting.mdscripts/sw_capability_probe.pyreferences/complex-mechanical-routing.mdThese paths are extracted from the text. Check the upstream package to verify the files exist.
Invocation syntax and available tools depend on your Agent client. Client integration guide ↗
Choose the target agent and installation scope, keep referenced package files, then verify the skill appears in the client's catalog.
This skill references supporting files. Retrieve the complete directory from the source; copying SKILL.md alone may leave missing dependencies.
Copy these instructions to a compatible agent and confirm the target directory matches your client.
Install the agent skill "solidworks-automation" into my project. The full SKILL.md and official description are at https://zicq.com/en/skills/skl-8adfcce08ea20cbc-Solidworks-Automation.html Save it as .cursor/skills/solidworks-automation/SKILL.md or .claude/skills/solidworks-automation/SKILL.md and keep the frontmatter name and description exactly as-is. This skill also ships scripts/, references/, or assets/ — fetch the whole folder from https://github.com/wzyn20051216/solidworks-automation-skill instead of creating only a SKILL.md.
Requires Node.js and npx. First inspect the repository's skill list to confirm the name.
npx skills add 'https://github.com/wzyn20051216/solidworks-automation-skill' --list
npx skills add 'https://github.com/wzyn20051216/solidworks-automation-skill' --skill 'solidworks-automation'
The CLI lets you choose the agent interactively. The default scope is the project; use -g for user scope. Confirm package availability with the discovery command, then use npx skills list to inspect installed skills.
pywin32 / comtypesmcp / pydanticPyMuPDF;它从 SolidWorks 导出 PDF 回读实际尺寸文字边界,已包含在 requirements.txttrimesh / pygltflib / numpy / Pillow~/.openclaw/skills/solidworks-automation/ 或 ~/.agents/skills/solidworks-automation/所有代理在执行 SolidWorks 自动化前,先运行技能自检:
python SKILL_DIR/scripts/sw_preflight.py
桌面端或 CLI 执行前建议先运行环境诊断:
python SKILL_DIR/scripts/cad_studio.py doctor
capabilities.yaml 是 Skill、MCP、队列和 UI 共用的能力唯一真源。能力等级为 verified、pilot、reference_only 或 not_implemented;后两者不得作为无人值守交付。该清单还维护 Python、C# PIA/Add-in、原生 C++、SWBasic、OCCT 和外部求解器的原子操作路由;执行前可用 python scripts/backend_router.py --list 查询,规则见 references/language-backend-routing.md。
SLDPRT/SLDASM/SLDDRW/DWG 等原生格式;开放格式任务优先路由到 headless_open_format_writing。scripts/headless_cad_writer.py;OCCT/OCP 隔离进程真实写入 STEP、IGES、BREP、STL、OBJ、GLB,二维后端写入 DXF、SVG、PDF、PNG,并生成几何与 SHA-256 证据。preview_scene;已有 DXF 可通过 python scripts/cad_studio.py preview-dxf --input drawing.dxf --output drawing.scene.json 或 MCP cadstudio_build_dxf_preview_scene 转成受限 PreviewScene。该命令只读白名单实体并拒绝覆盖旧文件。blocked。禁止通过改扩展名或空文件伪造支持。delivery-preview 只允许显示当前任务真实产物;固定样例必须标记 demo-showcase 与 isDemo: true,不得进入交付判断。规则:
comtypes / win32com / pythoncom 时,向用户弹出友好确认:
检测到当前 Python 环境缺少 comtypes / win32com 库,是否授权 AI 自动为您配置本地环境?[Y/N]Y / yes 后,代理可在本地 shell 中自动执行 python -m pip install "pywin32>=305" "comtypes>=1.2.0" 补齐依赖;用户拒绝时停止并给出手动安装命令。fallbackPolicy=allow_open_formats,继续执行无头开放格式后端,不要把整个任务误标为失败。按任务最小化安装依赖,不要在普通零件建模时强制安装网格转换库;工程图交付需要标准 requirements.txt 中的 PyMuPDF:
# 核心 SolidWorks COM 自动化依赖
python -m pip install -r SKILL_DIR\requirements.txt
# 仅在需要 GLB/GLTF/OBJ/STL 网格检查、缩放或转换时安装
python -m pip install -r SKILL_DIR\requirements-mesh.txt
执行涉及 GLB/GLTF/FBX/BLEND 转 OBJ/STL 的任务前,先用 importlib.util.find_spec() 检查
trimesh、pygltflib、PIL 是否可用;缺失时先提示用户需要安装哪些库和用途,再安装或给出手动命令。
import sys; sys.path.insert(0, r"SKILL_DIR/scripts")
from sw_connect import mm
from sw_part import sketch, sketch_circle, extrude_boss
from sw_session import SolidWorksSession
session = SolidWorksSession()
model = session.new_part()
with sketch(model, "Front Plane") as sketch_name:
sketch_circle(model, 0, 0, mm(25))
extrude_boss(model, sketch_name, mm(50))
session.save(model, r"C:\temp\cylinder.sldprt")
session.export(model, r"C:\temp\cylinder.step")
将
SKILL_DIR替换为此技能的实际安装路径。
根据用户需求选择对应模块:
| 需求 | 脚本 | 参考文档 |
|---|---|---|
| 入口自检与依赖补齐 | scripts/sw_preflight.py | references/troubleshooting.md |
| 无 CAD 开放格式写入 | scripts/headless_cad_writer.py、scripts/cad_studio.py write-open-format | capabilities.yaml、公共 CAD Core Schema |
| 高级能力/类型库探测 | scripts/sw_capability_probe.py | references/complex-mechanical-routing.md |
| Python/C#/C++/SWBasic/OCCT 后端选择 | scripts/backend_router.py | references/language-backend-routing.md、capabilities.yaml |
| C# 进程内 Add-in 宿主、事件与 UI | scripts/sw_addin_host.ps1、scripts/sw_addin_host.py | references/solidworks-addin-host.md |
| 多模型宏生成防护 | scripts/sw_macro_guard.py | references/openclaw.md |
| 友好会话 API | scripts/sw_session.py | - |
| 连接与文档管理 | scripts/sw_connect.py | - |
| 外观与材质 | scripts/sw_appearance.py | references/appearance.md |
| 零件建模(草图+特征) | scripts/sw_part.py | references/part-modeling.md |
| 标准外啮合直齿轮实体 | scripts/sw_gear.py | references/gears.md |
| 盲孔/沉孔/沉头孔/半圆端槽与孔位验收 | scripts/sw_hole_features.py、scripts/sw_review.py | references/complex-hole-features.md、references/review.md |
| 自然语言到参数化设计计划 / VibeCAD | subskills/solidworks-vibecad/scripts/plan_from_brief.py | subskills/solidworks-vibecad/SKILL.md、subskills/solidworks-vibecad/README.md |
| 多圆角/倒角 CNC 机加工件 | subskills/solidworks-fillet-chamfer-cnc/scripts/create_cnc_mount_template.py;高级圆角用 verify_advanced_fillets.py | subskills/solidworks-fillet-chamfer-cnc/SKILL.md、subskills/solidworks-fillet-chamfer-cnc/references/cnc-fillet-chamfer-lessons.md |
| 螺丝孔/螺纹孔、攻丝底孔 | subskills/solidworks-threaded-holes/scripts/create_threaded_hole_template.py | subskills/solidworks-threaded-holes/SKILL.md、subskills/solidworks-threaded-holes/references/threaded-hole-lessons.md |
| AutoCAD DWG/DXF 二维绘图、线稿转 CAD、批量改图 | subskills/autocad-automation/scripts/acad_draw.py、subskills/autocad-automation/scripts/acad_review.py | subskills/autocad-automation/SKILL.md、subskills/autocad-automation/references/troubleshooting.md |
| 装配体操作、齿轮联动/铰链/可拖动运动配合 | scripts/sw_assembly.py | references/assembly.md |
| Motion Study 运动算例、旋转马达与结果审计 | scripts/sw_motion.py | references/motion-study.md、references/complex-mechanical-routing.md |
| 工程图出图 | scripts/sw_drawing.py | references/drawing.md |
| 文件导出 | scripts/sw_export.py | references/export.md |
| 配置族创建/激活、参数修改与自定义属性 | scripts/sw_document_data.py | references/advanced.md |
| 装配 BOM CSV 与 Pack and Go | scripts/sw_delivery.py | references/export.md |
| OBJ/STL 高还原网格参考导入 | scripts/sw_import_mesh_reference.py | references/mesh-reference-import.md |
| 结果自审查 | scripts/sw_review.py | references/review.md |
| 语义实体引用 | scripts/sw_entity_reference.py | 逐步替代 Face1/Edge1 和屏幕坐标 |
| DFM 制造风险复核 | scripts/dfm_review.py、scripts/dfm_profiles.py、scripts/cad_studio.py check-dfm | 供应商 profile、B-Rep 证据、机加工、钣金、激光切割和 3D 打印的结构化规则检查 |
| Routing 中性复核与前置 | scripts/routing_review.py、scripts/cad_studio.py check-routing、scripts/cad_studio.py routing-preflight | 端点、分段、长度、弯曲半径、碰撞/间隙、支撑、Routing BOM;原生写入必须等加载项/许可证证据 |
| FEA 前置、输入与受限求解 | scripts/fea_analysis.py、scripts/fea_convergence.py、scripts/cad_studio.py fea-preflight/prepare-fea/run-fea/run-fea-convergence | CalculiX 2.23 已验证线性/非线性静力、塑性、面接触、最终步 COPEN/CPRESS/CSLIP 与线性/非线性网格收敛;全部仍需工程复核 |
| 复杂曲面与模具 | scripts/advanced_geometry.py、scripts/advanced_geometry_ocp.py、scripts/advanced_surface_ocp.py、scripts/cad_studio.py review-advanced-geometry/create-ocp-loft/create-ocp-surface | 直纹/平滑 Loft、受限 Sweep/Knit/Thicken 可写并重开 B-Rep;G1/G2 和曲率半径只返回离散采样证据 |
| 本地 MCP Server | mcp-server/server.py | mcp-server/README.md、references/mcp-server.md |
| MCP 协议验证 | scripts/validate_mcp.py | mcp-server/README.md |
| 未封装 API 查证 | - | references/api-lookup.md |
| OpenClaw 控制 SolidWorks | - | references/openclaw.md |
| 钣金/焊件/仿真/属性 | - | references/advanced.md |
| 企业 Agent / 本地优先与云 RAG | apps/desktop/cad_workbench/knowledge_retrieval.py | references/enterprise-agent-rag.md |
| Codex/Claude/Gemini/OpenCode Provider Adapter | apps/desktop/cad_workbench/agent_providers.py | references/agent-provider-architecture.md |
| 综合机械工程 DAG 自动编排 | apps/desktop/cad_workbench/engineering_orchestrator.py | references/complex-mechanical-routing.md |
| 常见错误排查 | - | references/troubleshooting.md |
Pack and Go 在 SW2026 SP01.1 的基础两零件装配上已连续三次通过原生回归:SavePackAndGo() 实际输出装配体和两个零件,状态码均为 0,未使用暂存回退。部分版本的 GetDocumentNames() 仍可能在保存前只枚举顶层文件;不要用 AddExternalDocuments 补装配体原生零件,应先执行原生保存,再审计实际落盘依赖。若落盘仍缺依赖,scripts/sw_delivery.py::pack_and_go() 默认按 GetDependencies2 生成带 manifest 和 SHA-256 的 pilot 暂存包;需要严格原生语义时使用 fallback_policy="blocked"。外部引用、Toolbox、配置和工程图仍必须人工复核,因此总能力保持 pilot。
{baseDir}/scripts 下已有模块,不要重复手写 COM 连接逻辑。exec / shell 能力中执行短小、一次性的 Python 脚本,最小导入集如下:import sys
sys.path.insert(0, r"{baseDir}/scripts")
from sw_connect import connect_solidworks, mm, deg, new_document
None、保存/导出是否成功、输出文件是否落盘。references/openclaw.md。backend_router.py,再结合 preferredBackend、requiredOutputs、nativeFormatRequired 和 fallbackPolicy 判定后端;不要先假定 Python、C# 或 SolidWorks 必然可用。普通任务优先 Automation 等价接口,明确要求仅非托管 C++ 支持的原始 I* 指针语义时才升级到原生 C++。
事件订阅、PropertyManagerPage、TaskPane 或长期驻留 UI 走 solidworks_addin_ui_events 路由,优先 C# Add-in;必须检查 HKLM 注册、64 位 TLB 注册和 host-status.json,不能只凭 LoadAddIn=0 宣称成功。SW2026 的 PMP Handler 必须公开、COM 可见并提供 IDispatch class interface。sw_preflight.py;缺依赖则请求用户授权自动安装,缺 SolidWorks 则只阻断原生阶段。python scripts/cad_studio.py write-open-format --input model.cadstudio.json --out-dir output。python scripts/cad_studio.py check-dfm --input model.cadstudio.json --output output/dfm_report.json --process machining;支持 --profile supplier.json 和 --brep-evidence brep.json。报告缺少材料、壁厚、K 因子、割缝、成型空间或要求的 B-Rep 证据时返回 blocked,规则通过也必须人工复核。SolidWorksSession() 管理连接、打开、新建、保存、导出;需要底层控制时再组合 sw_connect.py、sw_part.py 等函数。subskills/solidworks-vibecad/SKILL.md,生成 design_plan.json 和执行摘要。subskills/solidworks-fillet-chamfer-cnc/SKILL.md,按“基础体 -> 外轮廓圆角/倒角 -> 孔槽切除 -> 孔口倒角 -> 审查”的稳定顺序执行。subskills/solidworks-threaded-holes/SKILL.md;默认按“参数/孔位校验 -> 攻丝底孔 -> Metric Tap 真实 Thread -> CosmeticThread/证据螺旋线降级 -> 孔口倒角 -> 重建后特征证据 -> 属性和审查”的稳定路线执行。Hole Wizard、外螺纹、英制/管螺纹和现有零件改孔仍按 pilot 处理。齿轮路由门禁: 当用户说“画/建模/生成齿轮”时,先读取 references/gears.md,不得把实体齿轮需求替换成 Gear Mate。只有标准外啮合直齿轮且已知模数、齿数、压力角、齿宽和轴孔时,才使用 scripts/sw_gear.py;制造任务不得臆造参数,仅做视觉 demo 时可显式声明默认值。斜齿、锥齿、内齿、齿条、蜗轮蜗杆、变位或生产级修形/侧隙必须转专用路线或人工复核,不强套标准直齿轮脚本。“齿轮联动/传动/配合”才路由到 sw_assembly.add_gear_mate_by_cylinders()。
references/complex-hole-features.md 并优先调用 scripts/sw_hole_features.py;创建参数证据必须再与 collect_geometry_measurements()、validate_hole_positions() 和剖视图交叉复核。subskills/solidworks-engineering-drawing/SKILL.md;该子技能消费根技能的模型、孔槽和属性证据。AutoCAD 的 DWG/DXF、二维图纸、线稿转 CAD、批量改图或 AutoCAD 原生预览任务,读取 subskills/autocad-automation/SKILL.md。机械/3D 打印开孔交付必须按可制造图纸处理:所有孔、槽、接口、水口、螺丝孔和螺丝柱同时给出规格、数量和定位尺寸;图面拥挤时用孔表/槽表,不得用长引线替代关键尺寸。references/mesh-reference-import.md:公开网格/蓝图参考优先,不要在低保真手搓底稿上反复精修;需要导入 OBJ/STL 时优先用 scripts/sw_import_mesh_reference.py。sw_macro_guard.py 做模型分流、代码校验、重试和本地模板兜底。session.export() 或 sw_export.py 保存/导出文件。sw_review.py 导出预览图并自审查;如果有 GUI/桌面截图能力,打开 SolidWorks 视图截图复核。sw_capability_probe.py 并读取 references/complex-mechanical-routing.md;Routing 使用 routing-preflight/check-routing,FEA 使用 fea-preflight/prepare-fea/run-fea/run-fea-convergence,复杂曲面使用 review-advanced-geometry/create-ocp-loft/create-ocp-surface。FEA 和高级曲面求解通过仍为 review_required。references/enterprise-agent-rag.md;默认只用本地知识,云 RAG 必须显式启用、声明 external_network 并完成人工审批。apps/desktop/cad_workbench/engineering_orchestrator.py 生成阶段 DAG。必须按依赖串行执行关键 CAD 写操作,每阶段独立保存产物和验收证据;局部修改只重规划受影响阶段及其后继,禁止把整项工程塞进一条超长 Prompt 后一次性宣称完成。以后凡是本技能参与 CAD/机械结构/3D 打印项目,都默认执行这些底线:
当用户要求汽车、消费电子、雕塑等真实对象外观高还原时,先区分“视觉参考模型”和“工程可制造参数模型”:
.glb/.gltf/.fbx/.blend 先转换为 .obj/.stl;OBJ 优先保留材质,STL 作为无材质兜底。requirements-mesh.txt 中的可选依赖可用;缺失时说明用途并提示安装。sw_import_mesh_reference.py;关键写法是 LoadFile4(path, "r", create_empty_dispatch_variant(), errors),不要用 OpenDoc6() 或把 None 传给 LoadFile4()。当模型包含车身、玻璃、灯组、轮胎、轮毂或其他多种颜色时:
references/appearance.md,统一使用 sw_appearance.py,禁止把普通 Python list 直接传给 COM 材质属性。verify_appearance() 或 apply_component_palette() 回读 RGB;只检查 setter 返回值不算通过。model.ClearSelection2(True);sw_review.save_preview() 已内置该清理。tests/solidworks_appearance_regression.py,再重建用户模型。当用户要求“让 SolidWorks 支持 MCP”“接入 Codex/Claude Desktop 工具调用”“不要每次生成一大段 Python 脚本”时:
mcp-server/README.md。powershell -ExecutionPolicy Bypass -File mcp-server/register_all_ai_mcp.ps1 -InstallDependencies;它会尝试注册 Codex、Claude Code、Claude Desktop、Cursor、Windsurf。stdio MCP server:python mcp-server/server.py。cadstudio_write_open_format;DFM、Routing、FEA 和复杂几何分别调用 cadstudio_check_dfm、cadstudio_check_routing、cadstudio_routing_preflight、cadstudio_fea_preflight、cadstudio_prepare_fea、cadstudio_run_fea、cadstudio_run_fea_convergence、cadstudio_review_advanced_geometry、cadstudio_create_ocp_loft、cadstudio_create_ocp_surface;SolidWorks 原生操作再调用白名单 solidworks_* 工具。scripts/sw_*.py 中已验证封装。examples/08_mini_fan_motion_assembly.py;它验证自动建模、装配、Mate 和 Motion Study,不承诺圆角/倒角外观完美。当用户要求“能动起来”“在 SolidWorks 里拖动”“铰链”“齿轮联动”“真实机械配合”时:
references/assembly.md 的运动型装配工作流;如果用户明确要求 Motion Study / 运动算例 / 马达,再读取 references/motion-study.md。sw_assembly.py 中的 resolve_component()、get_assembly_entity()、find_largest_cylinder_face()、add_mate5_checked()、add_concentric_mate_by_cylinders()、add_gear_mate_by_cylinders()。lock_rotation=False,不要用三基准面把轴、齿轮、上盖完全锁死。collect_mate_feature_summary() 或特征树遍历验证 MateGroup 下存在 MateConcentric、MateGearDim 等真实 Mate 特征。sw_motion.create_motion_study()、add_constant_speed_rotary_motor_by_cylinders()、calculate_and_play() 创建 Motion Study 和马达。sw_motion.validate_motion_studies() 或 MCP solidworks_validate_motion_study,检查类型、时长、马达数量、结果存在性和 results_out_of_date=False;只看到时间轴、动画或 Calculate=True 不算验收通过。当代理需要让大模型生成 VBA 宏时,必须通过 scripts/sw_macro_guard.py:
SldWorks、ModelDoc2、Sub、End Sub,通过后才允许交给 SolidWorks;不通过则重试。30s 超时;解析失败自动重试 1~2 次,重试 Prompt 追加更强格式指令。示例:
from sw_macro_guard import build_prompt, fallback_macro_for_request, validate_vba_macro
prompt = build_prompt("画一个 50mm 圆柱", model_name="claude")
macro = fallback_macro_for_request("画一个 50mm 圆柱")
result = validate_vba_macro(macro)
assert result.ok, result.issues
当任务需要调用 scripts/ 中尚未封装的 SolidWorks API 时:
references/api-lookup.md,再查询 SolidWorks 官方 API 文档,或本地 SolidWorks SDK / 参考资料,确认方法签名、参数含义、枚举值、返回值和版本差异。VARIANT / by-ref 参数、枚举值、选择标记和 SaveAs 类接口。None / False 检查。sw_review.py 生成预览图与审查报告。references/troubleshooting.md 或对应模块参考文档;常用逻辑再沉淀进 scripts/。每次生成、修改、导入或导出 CAD 后都要做自审查,除非用户明确说不需要:
model.ForceRebuild3(False)、model.ViewZoomtofit2() 刷新模型。scripts/sw_review.py 的 run_review() 导出 isometric/front/top/right 预览图并写入 *_review_report.json。evaluation.status、evaluation.issues、checks 和预览图;通过截图或导出的 BMP 检查:主体是否存在、比例/方位是否合理、关键部件是否缺失、是否明显重叠或悬空、文件名和输出路径是否正确。示例:
from sw_review import run_review
model.ForceRebuild3(False)
report, report_path = run_review(
model,
r"C:\temp\review",
basename="car",
expected_outputs=[r"C:\temp\car.sldprt", r"C:\temp\car.step"],
)
print(report_path)
print(report["evaluation"])
mm(50) 转换 50mm 为 0.05m,用 deg(90) 转换角度SldWorks.Application 自动连接,兼容所有版本Select2();基准面可用 SelectByID2("PLANE"),草图不要只依赖 SelectByID2("SKETCH")with sketch(model, "Front Plane") as sketch_name: 自动进入/退出草图;sw_part.py 会缓存草图对象引用,避免 SW2024 中文版按名称选择草图失败sw_assembly.add_component();SW2024 中文版下 AddComponent4 可能返回 None,封装会用 AddComponent5、静默打开零件、重新激活装配体后重试SAFEARRAY(double) 编组,并回读 RGB 验证VARIANT(pythoncom.VT_BYREF | pythoncom.VT_I4, 0) 包装start_sketch() 会自动兼容英文版 "Front/Top/Right Plane" 与中文版 "前视/上视/右视基准面"GetCorresponding() 用于把零件内面/特征映射到装配体上下文;同心 Mate 默认不锁旋转swmotionstudy.tlb 需加载;pywin32 下 CreateMotionStudy / Activate / Calculate 可能表现为属性,优先用 sw_motion.motion_member() 兼容Agent Workflows
Guide for creating effective skills. This skill should be used when users want to create a new skill (or update an existing skill) that exte…
Agent Workflows
Use the ClawdHub CLI to search, install, update, and publish agent skills from clawdhub.com. Use when you need to fetch new skills on the fl…
Agent Workflows
Orchestrate multi-agent teams with defined roles, task lifecycles, handoff protocols, and review workflows. Use when: (1) Setting up a team …
Agent Workflows
Spec-first, TDD, subagent-driven software development workflow. Use when: (1) building any new feature or app — triggers brainstorm → plan →…